How to connect bluetooth vdo dayton ms 4150 rs mp3 connect bluetooth - VDO Dayton GPS question. Trains Plowing Snow In Action★Awesome Powerful Trains Plowing Through Deep Snow 2017 2018 - Duration: 6:21. MIXED AMUSEMENT 6,679,178 views.
3 4 5 6 7 1 o Release button for operating panel 2 SOUND. Opens the “SOUND” menu. 3 POWER/VOLUME. Press: Switching on / off Turn: Setting the volume 4 INFO. Opens the “INFORMATION” menu. Radio mode: Preset button Briefly press preset buttons: Select station memory, Press and hold: Storing selected station on preset button CD changer mode: Selection of CD 1 to 6 in the changer magazine.
6 MENU. Opens the relevant settings menu, depending on the mode (Radio, CD, CD changer, NAV) 7 SCAN. Turn: Moves the cursor in the menus. Press: Confirms a selection in the menus. For radio, CD and CD changer: Search and scan functions 8 CLEAR.
Deletes the last entry / Returns to the next higher menu level 9 ALT-R.Planning an alternative route in navigation mode. 0 NAV. Opens the navigation menu.
Q. Play back current direction and (if available) the current TMC message. Display e CD.C. Switch to CD player, page 34 / CD changer (only with connected CD changer). R RADIO. Switch to radio mode.
Opens the “BAND SELECTION” menu (in radio-modus).page29. T MUTE. With mobile phone connected: Switch to telephone input Without mobile phone connected: Muting the system.
OPERATION Inserting a CD 1. Open the front panel. Insert the CD into the drive (printed side up). For audio CDs, playback starts automatically. Close the front panel.
Removing a CD 1. Open the front panel. Press the eject button.
Carefully remove the CD and close the front panel. Switching on / off Press the POWER/VOLUME knob to switch the unit on or off. Volume A When setting the volume, please make sure that traffic noises (horns, sirens, emergency vehicles, etc.) are still audible. Turn the POWER/VOLUME knob to set the volume. Setting the volume of the navigation messages The volume of navigation messages can be modified whilst a message is playing by turning the POWER/VOLUME knob. Press the button to hear a navigation message and set the NAV volume. Setting the volume of traffic announcements The volume of traffic announcements can be set in the “INFORMATION” menu.page 25.
MUTE Press MUTE to activate/deactivate the mute function. Notes: The current navigation message can be played whilst the system is set to mute by pressing the button.
No traffic announcements or navigation messages are made when muting is activated. Should you nevertheless wish to hear traffic announcements (with TA Scan activated) and navigation information without the radio or CD playing, simply turn the volume to zero on the unit. The announcements and information are then output at the preset volume (“TA volume” or “NAV volume” in the “INFORMATION” menu). TMC Scan (Traffic Message Channel) If you activate this function, the automatic search will only look for stations transmitting TMC information and will ensure that you receive as much TMC data as the unit can find.
TMC data are used in navigation mode for dynamic route planning and dynamic guidance. An increasing number of RDS stations transmit these TMC data. See also “Behaviour of TMC and TA” on the following page.
TMC is not yet available in all countries. Stations with Pay TMC (subject to a fee) content are not supported and are ignored during the search. If an MT 5011 TMC receiver is installed, “TMC Scan” setting in the Info menu has no influence on navigation.
Only the TMC data received by the TMC receiver is used for dynamic route planning, provided this is activated in the “Settings -TMC Source” menu. TA Scan (Traffic Announcements) Activate this function if you wish to hear traffic announcements (TA).
See also “Behaviour of TMC and TA” on the following page. If the radio has not been set to a station with TA, you will hear a warning tone and the radio will automatically search for a station transmitting traffic announcements.
News Activate this function, if you wish to listen to news, e. Even when a CD is playing or when the unit is set to mute. Using the RDS-EONfunction, the unit can also receive the news from other stations. News broadcasts may be interrupted by traffic announcements. The “News” function is not yet available in all countries. Level (Announcement level) Set the volume difference for traffic announcements, news and alerts to the current volume setting. Level (Guidance level) Setting the guidance level controls the volume of announcements (in navigation mode).
Possible settings range from OFF to 8. If it is set to “OFF”, no audible navigation information will be heard.
Switching the unit off and then on again removes this setting and the value is reset to “1”. “INFORMATION” MENU Behaviour of TMC and TA If you switch on TMC Scan, you ensure that the radio will only search for stations transmitting TMC data during the automatic search. If the reception quality of the TMC station deteriorates drastically, the unit will indicate this by outputting a warning message. If you do not need guidance or are listening to an audio CD, yet you do not wish to go without current traffic announcements, switch on the TA Scan function. In that case the radio will play the traffic announcements even if it is in CD or CD changer mode or muted.
Depending on the selected function and the station, the radio display will show the TA or TMC status: Station transmitting. Displayed message with setting in the “INFORMATION” menu: TA Scan ON TMC Scan ON Both ON Both OFF No TA No TMC -. u -. No display No TA TMC y t t t TA No TMC u u x TA TMC t t t. In this case the unit will immediately start searching for the next strongest TA station signal.
■ Traffic announcements from other stations - EON With the RDS function EON (Enhanced Other Networks) you will hear traffic announcements even if the set station does not transmit its own traffic information but is operating on a network with other stations. If you have activated TA Scan, stations with EON will be treated like TA stations, i.e. The search will also stop at these stations. When a traffic announcement is made, the unit switches to a traffic information station linked to EON. The program name of the traffic information station is displayed during the traffic announcement. After the announcement, the unit returns to the previous program.
Sound settings Select the desired option by turning the right SOUND SETTINGS rotary control. Bass Press the right rotary control in order to activate Treble the setting. Balance Move the slide control to the desired setting by Fader turning the right rotary control. Press the right rotary control in order to store the setting. – Bass: Setting the bass (low tones). – Treble: Setting the treble (high tones).
– Bal.: Setting of volume balance left right. – Fader: Setting the volume distribution rear front. Slide control left: rear Slide control right: front Sound settings cannot be performed for navigation information, traffic announcements and telephone operation. Loudness Activate this function to increase low and high tones at low volume settings.Selecting one of the pre-setsound styles deactivates the loudness function. Sound Style Select one of the pre-setsound styles.
Select “User” to retain your own bass and treble settings.For each sound source, the sound style is stored separately. SOUND SETTINGS SDVC (speed-dependentvolume increase) To compensate for environmental noise, the volume for audible information increases as a function of the speed. Choose a setting for the speed-dependentincrease of the volume.
Select OFF to deactivate the function or select 1 to 5 to choose the desired volume increase. 1 is the lowest, 5 the highest volume increase. Sound Setup Setting one of the following functions: – Sound Reset: Reset the sound setting to the factory-set values and switch off loudness. – Leveller: Activate this function to equalise volume differences between the various sound sources. – Loud Low: Set the enhancement of low tones at loudness. – Loud High: Set the enhancement of high tones at loudness.
![Vdo Vdo](http://img0112.popscreencdn.com/163168382_vdo-dayton-ms-4150-rs-radio-navigationsystem-cd-top.jpg)
– Bass Freq: Select the transitional frequency for the low tones. – Treb Freq: Select the transitional frequency for the high tones. Initialisation See “INITIALISATION” page 37. RADIO Listening to radio TA/TMC: Traffic Announcement / Time of day TMC (see “INFORMATION” menu) Waveband 13:29 t CD symbol flashing: Route being FM A RADIO DX 6 planned. Do not remove map CD! Frequency 105.9 Preset number FFH Selected search sensitivity (during automatic search tuning) Station name Selected search type (only for RDS stations) If the unit is not yet in radio mode:Press the RADIO button. Select waveband In radio mode: Press the RADIO button again.
Select the desired waveband and press the right rotary control. The following wavebands are available: FM A, FM B, FM AST (Autostore) MW, MW AST (Autostore), SW and LW. Six stations can be stored for each waveband. FM AST and MW AST can only be stored with the Autostore function. Setting stations Stations can be set or searched for in various manners: Automatic search Turn the right rotary control to the right or left in order to tune to the next station with a strong signal in the currently selected waveband.
If “TA Scan” is activated, the radio will search only for stations from which traffic announcements can be received. If “TMC Scan” is activated, the radio will search only for stations from which traffic information can be received. Scanning receivable stations - SCAN Press the right rotary control in order to briefly play all the receivable stations in the currently selected waveband.
Press the control again in order to stop the scanning process. RADIO Setting frequency manually Activate “Manual tuning” in the radio menu. Slowly turn the right rotary control to the right or left in order to change the reception frequency step-by-step. Turn the control quickly by a few notches in order to start a fast search. Press the control to stop the search. Press the control again to return to the automatic search.
After 50 seconds, the radio switches back to automatic waveband tuning. Presets You can store 6 stations for each waveband on the preset buttons from 1 to 6.
Tune to the desired waveband and station. Press the desired preset button until you hear a confirmation tone.The station selected is stored on the preset button. Stations cannot be stored manually in the FM AS and MW AS wavebands, these are used exclusively for the Autostore function. “RADIO” menu.
Recalling stored stations Tune to the desired waveband. Press one of the preset buttons in order to recall the desired station. RADIO Manual Tuning Select this option to set a frequency manually, for example, if the desired station cannot be set using the automatic search function. See previous page for this function. PTY Search (only in FM) This function allows you to search for stations of the desired program type. Select the desired program type from the list. Press the right rotary control to start the PTY search.
PTY is not supported by all RDS-stationsand is not available in all countries. Radio Setup Set one of the following functions: ■ Search Level: Setting the search level. Select “LO” if you want automatic waveband tuning to only search for local stations (strong signals).
Select “DX” to also search for distant stations. ■ Tuner Grid: Select “EUR” or “USA” depending on which continent you are currently in.
A If you change the tuner grid, all station memories and the stations in RDS Memo will be deleted! ■ AF re-tuning(only in FM) The radio continuously checks a series of alternate frequencies (AF) for the selected station and automatically chooses the best frequency. Deactivate this function only if you hear brief interruptions of transmission or if the unit automatically switches to an undesired station (e.g. To an other regional station belonging to the selected station). Initialisation See “INITIALISATION” page 37.
CD PLAYER CD player CD Audio: CD title (only with CD text) 10:44 x MP3: directory name Rock Mix CD-Audio: Track and artist Ray Of Light MP3: File name or ID3 tag Madonna Elapsed track time (only with CD text) T05 02:59 (if available) Selected search and playback mode Track number You can play 12 cm audio CDs and discs with MP3 files on your CD player. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A Do not insert DVDs or shaped CDs in the CD player. If you ignore these recommendations, you risk damaging your unit. The system may not be able to play copy-protectedaudio CDs which do not correspond to the Compact Disc Audio Standard or play them properly. If there is no ID3 tag, only the file name is displayed.
If playing MP3 files in the CD’s master directory, “CD-CA”(CD Compressed Audio) will be displayed as the directory name. CD / MP3 playback If the unit is not yet in CD mode: Press the CD.C button once or twice until “CD PLAYER” is displayed. Once inserted, the CD will start to play automatically. If, after using the navigation CD, you insert the same Audio CD you were using previously, play will continue from the point where you left off. With MP3 or mixed mode CDs, it may take a while for the directory structure to be read, depending on the complexity of the file structure and the number of files. ■ Playing mixed mode CDs With mixed mode CDs (combinations of audio and data, e.g. MP3), the audio tracks are assigned to their own directory, which is then displayed with “CD-DA”(CD Digital Audio).
This directory is played first. Skip track (previous/next) Turn the right rotary control to the right or left in order to select the next or the previous track. If the right rotary control is turned one detent position anti-clockwiseafter the first 10 seconds of a track, the CD player jumps to the beginning of the current track. Selecting MP3 directories (previous/next) Press the right rotary control to switch the rotary control function to change directory. Turn the right rotary control to the right or left in order to select the next or the previous directories on the MP3 CD. Press the control again to return the rotary control to its original skip track function.
Activate this function in order to perform a manual search using the right rotary control. Turn the right rotary control one notch to the right or left in order to start the first level of the fast search forwards or backwards. Turn the rotary control again one notch to the right or left in order to start the second, faster search level. Press the right rotary control to stop the fast search. Press the control again to return to the skip track function. During the manual search, you will hear the CD at increased speed.
The function of the right rotary control is switched back to the skip track function 50 seconds after the last time the manual search is used. Random Activate this function to listen to the tracks on the current CD in random order. Press the right rotary control to return to normal playback.
![Vdo dayton ms 4150 software developers Vdo dayton ms 4150 software developers](http://codedradio.info/pics/VDO%20DAYTON/ms4150.jpg)
Repeat Track Activate this function to repeat the current track. Press the right rotary control to return to normal playback. Track Scan Activate this function to scan all tracks on the inserted CD for 10 seconds each. Press the right rotary control to stop scan mode and return to normal playback.
CD Setup Set one of the following functions. – Compression: If activated, this function will reduce the volume for loud sections and increase it for quieter sections. – Comp Rate: Select the degree of loudness decrease/increase when compression is switched on. Initialisation See “INITIALISATION” page 37. A digital CD changer can be connected to the navigation radio.
A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A Do not load navigation CDs into the CD changer. A Do not insert DVDs or shaped CDs in the CD changer magazine. If you ignore these recommendations, you risk damaging your unit. The system may not be able to play copy-protectedaudio CDs which do not correspond to the Compact Disc Audio Standard or play them properly. CD changer playback If the unit is not yet in CD changer mode: Press the CD.C button once or twice until “CD changer” is displayed.Playback of the last played CD resumes.
If you changed or removed the CD magazine in the meantime, playback will begin with the first CD in the magazine. Selecting a CD Press one of the preset buttons from 1 to 6, in order to select the desired CD from the CD magazine, or: Press the right rotary control to switch the rotary control function to change CD. Turn the right rotary control to the right or left in order to select the next or the previous CD in the magazine. Press the control again to return the rotary control to its original skip track function.
Skip track (previous/next) Turn the right rotary control to the right or left in order to select the next or the previous track. If the right rotary control is turned one detent position anti-clockwiseafter the first 10 seconds of a track, the CD player jumps to the beginning of the current track. Activate this function in order to perform a manual search using the right rotary control. Turn the right rotary control one notch to the right or left in order to start the first level of the fast search forwards/backwards. Turn the rotary control again one notch to the right or left in order to start the second, faster search level. Press the right rotary control to stop the fast search.
Press the control again to return to the skip track function. During the manual search, you will hear the CD at increased speed. The function of the right rotary control is switched back to the skip track function 50 seconds after the last time the manual search is used. Random Activate this function to listen to the tracks on the currently selected CD in random order. Press the right rotary control to return to normal playback. Repeat Track Activate this function to repeat the current track. Press the right rotary control to return to normal playback.
Track Scan Activate this function to scan all tracks of the current CD for 10 seconds each. Press the right rotary control to stop scan mode and return to normal playback. CD Title Assign a name with up to 13 characters to the CD currently playing. The CD will be recognised automatically by the CD changer, and the CD changer will display the CD title. If your CDs have CD text, you can also overwrite the CD title displayed. Up to 50 CD titles can be stored automatically in the title memory. Once the memory is full, you will have to first select a title to be deleted before you can enter a new one.
Changer Setup: Set one of the following functions. – Compression: If activated, this function will reduce the volume for loud sections and increase it for quieter sections. – Comp Rate: Select the degree of loudness decrease/increase.
This function is only available with compression activated. Initialisation See “INITIALISATION” page 37. Telephone Adapt your unit’s telephone input to your car phone: – NONE: No car phone is connected to the unit. – MUTE: Playback on the current source is automatically interrupted when your car phone is in use. For this purpose, the car phone’s muting signal must be connected to the device (see installation instructions). – IN: Playback on the current source is automatically interrupted and the incoming call is played through the car loudspeakers. For this purpose, the car phone’s muting signal and audio output must be connected to the device (see installation instructions).
Tel Signal: Adapt your unit’s telephone input to the muting signal of your car phone: – Low: Muting signal “active low”. Radio switches to mute at 0 V. – High: Muting signal “active high”.
Radio switches to mute at 12 V. Level: Adapt the car phone’s volume to the navigation radio’s telephone input.The volume adjustment can be set to between -30and +30. Beep Type: Select a confirmation/alert sound. You have the choice between 4 different sounds. Beep Level: Set a level between 1 and 5 for the confirmation/alert sound. Startup Vol.: This is where you set the maximum start-upvolume, between 5 and 40.
When you switch on the unit, the volume will always be set to this level if the volume was louder than this level when you switched off. Clock Settings Setting the time format and the time zone: – Clock Format: Select between 12 or 24 hour format. – Timezone (only for GPS clock): Set the time difference to UTC (equivalent to Greenwich Mean Time, London). INITIALISATION On Off logic Activate this function to limit the operation of the device to one hour after the ignition key is removed. Display Setting the display contrast and the display brightness. Set the contrast and brightness for the display between 0 and 31 as required.
Loudspeaker Test Activate this function to control the loudspeaker connections and positions. You will hear several consecutive confirmation tones in turn from one of the four loudspeakers. Switch the unit off to terminate the loudspeaker test. Security Code (anti-theftprotection code) You must enter the code in order to open the menu for activating, deactivating or changing the code.
The number of entry attempts is unlimited. In the factory settings, the code is set to “0000” and deactivated. You can activate the code and change the numbers. Proceed as follows to enter the security code: Enter the first digit by turning the right rotary control.
Press the control to confirm. Enter the next three digits as described above. If you confirm an incorrect digit, you can delete it by pressing CLEAR. Following a voltage supply interruption to the unit (e.g. Removal) with an active code, the unit is blocked following ten incorrect entries of the code.
The unit can only be reactivated by taking it to a Service department along with proof of ownership. This service is subject to a fee.
■ Code active Activate this function if you wish to protect the device with the security code. If the power supply is interrupted (e.g. If the unit is removed), the navigation radio will be disabled once the supply is restored and can only be reactivated by entering the security code. If the security code has been activated, when the ignition key is removed, the anti-theftLED will flash on the front of the unit. ■ Change code Enter a sequence of digits of your choice as the new security code. Make a note of the code and keep it in a safe place (not in the vehicle!). C-IQ– INTELLIGENT CONTENT ON DEMAND C-IQ- Your key to map, traffic and travel information With your navigation radio you get several CDs containing all the available map data of Europe, plus digital travel guide products and TMC data (for dynamic navigation).
The information or products on the CDs are encrypted and, if required and after expiry of an activation period, can be activated. using an access code, subject to payment of a fee. Your advantages: – You only pay for the information that you actually use. – You only pay for the time that you actually use.
– After the first activation, you will automatically receive subsequent CD updates. – You are always in possession of the latest information. – Activation can be obtained conveniently via the Internet at www.C-IQ.netor via the C-IQService Centre Hotline (see further information about C-IQ).) the automatic update service (regular dispatch of updated CDs at least once a year within a period of activation) is only available upon registration and does not apply to unlimited C-IQactivations. Register via www.C-IQ.netor by telephoning the C-IQService Centre. Activation options The CD contains the latest version of the road map software available at the time of production. It also contains travel guide information for a number of countries as well as traffic information for dynamic route planning via TMC (in countries which offer this service).
You can activate – the road data – individual travel guides and if required – traffic information for a number of countries for a certain period of time (see also the preview in this chapter). Your C-IQService will be happy to provide more information about the various access options available. Information on C-IQ: Code-entryfor the activation C-IQcontent only works when the map CD (CD-ROM)is inserted.
For trouble-freeuse of C-IQcontent, it is imperative that the current date is received by the navigation system. This is only possible if at least one GPS satellite is being received (see “GPS / Compass” information screen).
C-IQ– INTELLIGENT CONTENT ON DEMAND Registering the navigation system In order to activate other C-IQproducts, you must register your navigation system with C-IQService. This also ensures that you will receive updated CDs on a regular basis, and will therefore always be using the latest maps (does not apply to unlimited activation). Registering the system also provides you with additional anti-theftprotection. If a unit is registered with C-IQService as stolen, C-IQService will not issue any new activation codes for C-IQcontents. To register your navigation system, you need the Navi ID. In a small number of cases, the Initial ID or version number of your map software is also required. To read out the Initial ID, move the cursor to “Initial ID” and confirm your selection by pressing the right rotary control.
The “ Z” symbol will take you back to the previous menu and you can access help for the current C-IQtopic by selecting “?”. Make a note of the Navi ID. You can now contact C-IQService and register your system. Activating products Once you have received your enable code, enter it into the system. In the main control menu, select “C-IQ”then “Code Input”. The cursor appears automatically on the first digit Code Input of the code.
8 Q R 5 - Z 4 A K Press the right rotary control to activate each digit G 6 - in the code. Next, turn the right rotary control to select the OK Quit? Correct code digit and confirm your selection by pressing the right rotary control.
You may change any of the code digits at any time by moving the cursor to the required position in the code and pressing the right rotary control. Once the code is complete, the cursor will automatically move to “OK”. Confirm by pressing the right rotary control. Once you have entered a correct code, the system will display information about the C-IQproducts you have just activated. The system will inform you if an incorrect code has been entered, and/or if your system software is not capable of processing the encrypted information.
In these cases, select either “OK”or “C-IQService”, if you wish to establish contact, and confirm by pressing the right rotary control. It is possible to operate the system without activation. Destinations can be entered.
Navigation information, however, will only be provided for activated areas and for activated services.
I have a VOD Dayton MS 4150 car radio: with a 8-pins CD changer port (C3 on the manual). The radio does not have an aux function. What I want is to connect my phone with an aux cable to the radio. What i've found so far is this; However that's a complete digital USB/aux package, quite expensive. It says on that page it will be able to fit into the CDC port of that specific radio. Something like $80 However I was just wondering.
If I could use something like this: Just a regular 3.5mm audio jack - 8 pins cable to the CDC port and if that will work (or not)? You might be able to use something like this, but there are trade-offs.
The 'kit' you show is plug-n-play. You'll have to repin the 3.5mm cabling to allow you to utilize it, unless you can find one which will work specifically with your system. The only thing you'll be able to do with the 3.5mm cable is pipe audio through it.
With the 'kit', you should be able to control your device directly from the car stereo. Getting the kit would allow you to control things 'hands-free', especially if you have steering wheel controls.
Cost is one thing, but ease of use and installation can make up for a lot of the difference. Well for $4 i can imagine I won't be able to control it, but that's ok. The only thing I want is indeed to pipe music trough it from my phone. You're saying I'll have to rewire it though?
So (maybe?) remove the blue/red/yellow cables in the blue plug and rewire them for where they need to go (aren't these ISO plugs?). I'm still not quite sure if you meant to say that it WILL work piping music trough it, however for the controls to work i'll have to rewire it. Or that you meant to say even for just playing music controlling it from my phone i will have to rewire as well.?
– Oct 9 '14 at 4:20.